ZMS15T Wet Coal Electric Drill

This model is an explosion-proof drilling rig with water injection function. When drilling, hollow drill rods and water injection drills can be used to inject water into the hole, thereby reducing dust.

Operating procedures

1、 Repairers of explosive devices must undergo technical training, hold valid certificates, and be familiar with the "Coal Mine Safety Regulations", "Coal Mine Mechanical and Electrical Equipment Maintenance Quality Standards", "Coal Mine Mechanical and Electrical Equipment Intactness Standards", and relevant standards and regulations for explosion-proof electrical equipment.

2、 Inspect and record the faults of the detonators that need to be repaired in this class, conduct regular performance parameter tests on the detonators, and master the structural performance and repair process of the detonators.

3、 When repairing the detonator, the capacitor should be fully discharged first, and then the components should be repaired or replaced.

4、 The replaced components should meet the requirements of the "Quality Standards for Maintenance of Coal Mine Mechanical and Electrical Equipment".

5、 Test the insulation resistance of the equipment and dry the affected equipment.

6、 It is strictly prohibited to conduct short circuit tests on two wiring terminals. To avoid damage to electrical components and equipment.

7、 After maintenance, the detonator must undergo a burst energy and discharge time test, and can only be used after passing the test.

8、 The repaired detonator must comply with the "Coal Mine Mechanical and Electrical Equipment Integrity Standards" and relevant standards and regulations for explosion-proof electrical equipment.

9、 Carefully fill out the maintenance records.

Risk Factors and Preventive Measures for Repairers of Folding Explosives

1. The risk factor for this type of work is electric shock injury.

2. To master the voltage level of small electrical equipment, it is necessary to use a power supply that matches the voltage level of the small electrical equipment for testing.

3. When testing small electrical equipment, one person must operate and one person must supervise.